Zeiss i.Profiler plus, Инструкция по эксплуатации

Страница: 63 / 66

Figures
61
EN 20_070_0009I v1.5
Figures
Fig. 1: Type plate on i.Profiler
plus
.......................................................................... 11
Fig. 2: Measurement principle for the Shack-Hartmann sensor ............................. 14
Fig. 3: Image of the points of light on the chip of the camera (A) and image of the
reconstructed wavefront map (B) over the entire exit pupil ......................... 15
Fig. 4: Imaging beam path of a topographical measurement device with a Placido
disc. A light beam starting at point P is reflected by the reflective, convex
surface of the cornea. The virtual point P’ is depicted on the camera P” via a
lens. .......................................................................................................... 16
Fig. 5: The image of the rings of the Placido disc on the camera for a normal cornea
................................................................................................................. 17
Fig. 6: i.Profiler
plus
, operating side view ................................................................ 19
Fig. 7: i.Profiler plus , customer side view ................................................................. 20
Fig. 8: Recessed grips on the bottom of the i.Profiler plus ....................................... 23
Fig. 9: Connector panel on the i.Profiler plus ........................................................... 24
Fig. 10: Changing a fuse on the i.Profiler plus ........................................................... 49