![background image](http://html1.mh-extra.com/html/zeiss/i-profiler-plus/i-profiler-plus_instructions-for-use-manual_3342073035.webp)
Installation
33
EN 20_070_0009I v1.5
Installing the NAS device
Connecting the NAS device directly to the i.Profiler
plus
(peer to
peer)
If you connect the NAS device directly (peer to peer) with the
i.Profiler
plus
, you must use the left network connection.
●
With the i.Profiler
plus
and NAS device switched off, connect the NAS
device directly to the i.Profiler
plus
using a so-called crossover cable
(crossed network cable). Complete information on installing the NAS
device is provided in the instructions enclosed with the NAS device.
Observe the safety information and requirements for cable
length and type.
●
Switch on the NAS device and wait until initialization is complete before
switching on the i.Profiler
plus
. Often, a light on the front of the NAS
device changes color to indicate that initialization is complete. Further
information is provided in the manufacturer's operating instructions.
Installing the Carl Zeiss Meditec (CZM)-NAS device
●
Switch on the i.Profiler
plus
. After starting the device, click the
Close
application
button in the
Power down
window and switch to the
Microsoft Windows desktop (Administrator rights required). It is possible
that an indicator of the LAN connection may be displayed on the taskbar
at the bottom right if there is a connection to a NAS device. Ignore this
notification temporarily.
●
On the Microsoft Windows desktop, double click the program icon
Initialize CZM NAS Mapping
, to connect the CZM-NAS device with the
drive letter
N:\
.
●
Double click the program icon
Save Configurations
, on the Microsoft
Windows desktop to save the completed configurations. The device will
then restart.