![background image](http://html1.mh-extra.com/html/zeiss/i-profiler-plus/i-profiler-plus_instructions-for-use-manual_3342073029.webp)
Installation
27
EN 20_070_0009I v1.5
Connecting the i.Profiler
plus
to an existing local
network
●
Connect the i.Profiler
plus
to the practice network (LAN) using a
network cable.
●
Switch on the i.Profiler
plus
. After starting the i.Profiler
plus
, use the
Close
application
button in the Power down window to switch to the
Windows desktop (Administrator rights required).
●
Double click on the Network Configurator pictogram on the desktop.
The Network Configuration Tool window opens.
●
Select the Ethernet connection you are using in the Network
Adapter field. The left connection is designated with [00000000],
and the right with [00000001].
●
Enter the new IP address in the IP address field. The first three number
blocks must match those of the network. The last number block is
freely selectable; however, the numbers may not already be assigned.
●
Change the subnet mask in the Subnet Mask field.
●
Press the
Change IP
button. The message "The static IP was set
successfully." appears.
●
If available, you must also enter the Gateway and DNS Server.
●
You can now close the Network Configurator.
●
Double click the program icon
Save Configurations
on the Windows
desktop to save the completed configurations. The device will then
restart.