![background image](http://html1.mh-extra.com/html/zeiss/i-profiler-plus/i-profiler-plus_instructions-for-use-manual_3342073028.webp)
EN 20_070_0009I v1.5
26
Installation
Alternatively, you can proceed as follows:
•
Click the pictogram on the right side of the taskbar.
•
Select
Graphics Options
from the menu bar.
•
Under
Output To,
select “Intel
®
Dual Display Clone" and then
"No Monitor.”
•
Double click the program icon
Save Configurations
on the Windows
desktop to save the changed configuration. The device will then restart.
Please always switch on the external monitor before turning on
the i.Profiler
plus
so it can be better detected during booting.
Connecting the i.Profiler
plus
to an existing network
with DHCP
•
Connect the i.Profiler
plus
to the practice network (LAN) using a
network cable.
•
After starting the i.Profiler
plus
, use the
Close application
button in the
Power down
window to switch to the Windows desktop
(Administrator rights required).
•
Double click on the
Network Configurator
pictogram on the
desktop. The
Network Configuration Tool
window opens.
•
select the Ethernet connection you are using in the
Network
Adapter
field. The left connection is designated with [00000000],
and the right with [00000001].
•
Select
Activate DHCP
.
•
Press the
Change IP
button. The message "Change to DHCP was
successful." appears.
•
Close the Network Configurator.
•
Double click the program icon
Save Configurations
on the Windows
desktop to save the completed configurations. The device will then
restart.