Zeiss Humphrey Field Analyzer 3, Инструкция по эксплуатации

Страница: 31 / 156

HFA3 Instructions for Use 2660021166131 Rev. A 2018-11
Go to Contents
Getting Started 3-9
Startup
Upon first startup, the instrument will prompt the user to configure or use default settings for
Locale, Network setup, User Management configurations, and Users. For details see
“Instrument
Settings,” on page 3-10 ). Leave the field blank or use 0000 (zero’s) when asked for the default
password.
CAUTION: To protect patient data change the password. We recommend setting the
password strength to HIGH.
1. Switch the instrument on by pressing the On/Off button, located on the operator side of the
instrument under the display.
2. Wait five minutes to allow the instrument to perform a self-diagnostic checkup. If the internal
computer detects a problem, a message will appear on the startup screen.
3. Select Continue to proceed or Details to view any error messages.
4. Log in by selecting the appropriate user from the drop-down menu and entering the password.
Note: The Emergency login allows a person who does not have access privileges to log in and use
the instrument. Emergency logins are audited and usage of the instrument is restricted. Emergency
login users cannot view or perform exams on existing patients.
If there is a question as to whether the HFA3 is running properly or if there is any question about
electrical or fire safety: TURN OFF AND UNPLUG THE INSTRUMENT and call ZEISS customer care as
soon as possible: 1-800-341-6968. Outside the U.S., contact your local ZEISS distributor.
Operating Environment
For optimal testing results, the HFA3 should be operated in a dimly lit room with minimal
distractions. The patient should be in a comfortable position throughout testing.
Operating Modes
The HFA3 has three modes of operation:
Mode Description
Local database Patient records are stored directly on the instrument. All functions,
including editing patient data and generating reports, can be done on
the instrument.
Connected - FORUM Data is automatically exported to the FORUM archive and deleted on
the instrument.
Connected - DICOM
Non-DICOM EMR Data is automatically exported to a DICOM archive, shared network
folder, or FTP folder.