Zeiss EXTARO 300, Инструкция по эксплуатации

Страница: 45 / 60

Instructions for Use Technical specification
Mechanical data
Designation Value
Microscope tilt mechanism Tilt angle from -50° to +60°
Weight of microscope Approx. 2 kg (without tube and eyepieces)
Suspension arm
Length: 600 mm (short arm, axis to axis), 1000 mm
(long arm, axis to axis)
Swivel angle: ±150°
Vertical lift: ± 300 mm (short arm), ± 400 mm (long
arm)
Carrier arm
Length: 500 mm (axis to axis)
Swivel angle: ±360° (floor stand/floor mount),
±163° (ceiling mount), ±97° (wall mount)
Yoke
(1). Angled (120°) yoke
(2). Straight yoke
Height of floor stand / floor mount 1735 mm
Base of floor stand / floor mount
Approx. 745 x 615 mm (floor stand)
Approx. 235 x 235 mm (floor mount)
Maximum permissible load
of suspension arm
With complete microscope equipment, including
accessories: must not exceed 7.5kg
Total weight of EXTARO 300
(1). OPMI with floor stand short suspension arm
approx. 125 kg (with all accessories).
(2). OPMI with wall mount long suspension arm
approx. 63 kg (with all accessories).
(3). OPMI with ceiling mount long suspension arm
approx. 66 kg (with all accessories).
(4). OPMI with floor mount long suspension arm
approx. 64 kg (with all accessories).
305935-3500-000 – 2.1 – 2017-12-15
44 / 59