Zeiss EXTARO 300, Инструкция по эксплуатации

Страница: 35 / 60

Instructions for Use Working with the microscope
Switching between Augmented Visualization modes
Short press (t<0.8s) the Mode
Control knob upward to
activate NoGlare Mode.
Short press (t<0.8s) the Mode
Control knob downward to
activate Fluorescence Mode.
Press the Mode Control knob
rightward to activate
TrueLight Mode or Orange
Color Mode. If both modes
are available, then a short
press (t≤0.8s) activates the
TrueLight Mode, and a long
one (t>0.8) results in Orange
Color Mode.
Press the Mode Control knob
leftward to activate Green
Color Mode.
 Availability of some Augmented Visualization modes are hardware and license
dependent.
 Once a mode is activated by a single press of the Mode Control knob in a
certain direction, a second press at the same direction will deactivate the mode
and returns to normal white light.
 Delay Curing Mode (TrueLight Mode or Orange Color Mode) and NoGlare
Mode can be turned on at the same time.
305935-3500-000 – 2.1 – 2017-12-15
34 / 59