Zeiss EXTARO 300, Инструкция по эксплуатации

Страница: 34 / 60

Working with the microscope Instructions for Use
Adjusting light intensity
Rotate clockwise to increase
light intensity
Rotate counter clockwise to
decrease light intensity
On the front face of the OPMI, there are 5 white-colored LED indicators arranged in
an arc above the Mode Control knob. These LEDs are designed to roughly indicate the
set intensity level of the illumination under the corresponding mode. Note that the
illumination intensity of each mode can be set independently and will be automatically
memorized by the microscope even after power off.
SpotLight function
Long press (t>0.8s) the Mode Control
knob upward to enlarge the
illumination spot. Release the knob
when you get the desired spot size.
Long press (t>0.8s) the Mode Control
knob downward to shrink the spot.
Release the knob when you get the
desired spot size.
33 / 59 305935-3500-000 – 2.1 – 2017-12-15