Zeiss EVO Скачать руководство пользователя страница 164 | Manualshive

Страница: 164 / 180

Zeiss EVO Скачать руководство пользователя страница 164

9 Technical Data and Conformity | 9.5 Performance Data and Specifications | EVO 25

ZEISS

Parameter

Description

HDBSD detector

(optional):

BSE imaging at low kV of metals, polymers, minerals, etc. both in HV
and VP modes.

YAG BSD detector

(optional):

Robust, fully retractable, YAG -crystal-based BSE scintillator detector
with rise time ~200 ns. Easy to use with no amplifier gain adjustment
required.

STEM detector (optional):

Scanning Transmission Electron Microscopy (STEM) detector, with pre-
aligned specimen holder and Bright-field (BF) STEM detector

CL detector (optional):

Cathodoluminiscence (CL) chamber detector (option for non-VP con-
figurations, included in VP option)

SCD (optional)

Specimen current detector

For more details refer to the document Product Specification.

9.5 Performance Data and Specifications | EVO 25

The Microscope System must only be operated in closed rooms. It is recommended to install the
Microscope System in a dark room where artificial illumination, sunlight or other light sources
cannot interfere with image acquisition. The Microscope System should not be installed near win-
dows with direct sunlight or radiators. Compliance with the installation requirements of the Mi-
croscope System and the availability of the requested supplies is the responsibility of the customer
and has to be provided at the time of installation. Due to continuous development, we reserve the
right to change specifications without notice.

The Microscope System must be plugged into a properly installed power socket with protective
earth contact using the supplied mains cable. The protective earth connection must not be im-
paired by the use of extension cables.

Info

Your ZEISS Sales & Service Partner will provide you with the detailed installation requirements.

Weight and Sizes

Main Components

Length
(mm)

Width (mm)

Height
(mm)

Weight (kg)

column

807

1031

1780

650

Overall

1930

1781

1780

720

Air Conditioning

and Quality

Parameter

Value

Temperature range for operation with indi-
cated performance (24 h per day, regardless
of whether the microscope is in operation or
switched off)

20–30 °C

It is recommended that for operator comfort
the room temperature is maintained between
22 °C and 24 °C.

Recommended best temperature stability

± 0.5 °C/h

Long-term recommended stability

not more than ± 2 °C/24 h

164

Instruction Manual ZEISS EVO | en-US | Rev. 10 | 354706-0780-006

«
...
162
163
164
165
166
...
»

Содержание EVO





















































































































































































Отзывы:

Нет отзывов