![background image](http://html1.mh-extra.com/html/zeiss/elyra-7/elyra-7_operating-manual_3332235251.webp)
ELYRA 7
Left Tool Area and Hardware Control Tools
ZEISS
03/2019 V_02
000000-2262-999
247
Repeat the process with the
Right
slider and input box; here the marking lines are in blue and the
illumination slider
in the
image control area
should be placed to 2, showing the right side
illumination of the original data.
The
Preview
in the image container will show the position of both sliders
Left
and
Right
as red and blue
lines respectively (Fig. 421).
To avoid a visible change in intensity along the two cut off lines, for
Mean Fusion
with
Fusion Subset
in X
, an overlap of both illumination sides should remain in the center of the image and the
Blending
slider should be used to define the number of pixels used within this overlap to crossfade both
illuminations sides.
The position of the sliders
Left
and
Right
as well as the
Blending
value must be defined for each View
individually.
Fig. 420
Dual Side Fusion – Fusion Subset in X
Fig. 421
Dual Side Fusion – Fusion Subset in X, Preview
and Image control area