![background image](http://html2.mh-extra.com/html/zeiss/contura/contura_operating-instructions-manual_3323956099.webp)
What you should know!
61211-1310402
CONTURA
7-3
Using the measuring software, it is also possible to probe oblique sur-
faces perpendicular to the probing surface. See operating instructions
for the measuring software.
NOTE
Clamp a workpiece before probing. Otherwise, the workpiece may be
shifted by the probing. Correct measurement is not possible if the work-
piece is shifted.
NOTE
In the ideal case, probings should be performed perpendicular to the
probing surface.
Tips for effective operation
Changing the stylus systems automatically
If several stylus systems are required for workpiece measurement, you
should note which stylus system you have assigned to which holder. If
more stylus systems are required than can be accommodated by the
changer rack, it is possible to mount additional changer racks.
Do not switch off the CMM if ...!
The start-up procedure involves a number of worksteps which take a
while to perform. Furthermore, the CMM should have been in operation
for a prolonged period before performing the first measurement. You
can save time by leaving the CMM switched on.
In order to avoid that the measured values are influenced by switching
on and off, the CMM should be switched off as seldom as possible. We
recommend that you switch off the CMM only in the following cases:
–
In case of longer shutdown, for example during the weekend
–
Maintenance work.
Содержание CONTURA
