Zeiss CONTURA, Руководство по эксплуатации

Страница: 22 / 158

Intended use
2-4
61211-1310402 CONTURA
Stylus system
The stylus system consists of several components: Adapter plate, stylus
and stylus system components. One or more styli can be mounted on a
stylus system. The stylus tip is located at the end of the stylus.
Functions of the stylus system :
– The adapter plate holds and positions the stylus system exactly in the
probe.
– Workpiece probing is carried out by the stylus tip.
Reasonably foreseeable misuse
The probe, the probe carrier and the stylus system must not be used for
purposes other than their proper use.
Examples :
– The probe must not be used as a support.
– The stylus system must not be used as a lever arm, e.g. to loosen a
ring bolt.
– The stylus system must not be used as a hammer.
Changer rack
The changer rack is used for automatic change of stylus systems. This
changer rack must not be used for other purposes.
Rotary table
The rotary table is a high-tech product which may be used only for its in-
tended purpose.
Workpieces can be positioned in any angular position by means of ro-
tary tables. This allows high-precision angular and radial measurements.
Rotationally symmetri-
cal objects
Measurement of rotationally symmetrical objects is a special application
of rotary tables: e.g. gears, turning parts, camshafts. Rotary tables also
facilitate the measurement of prismatic parts.
Functions of the rotary table:
– Holding the workpiece
– Positioning the workpiece
– Probing with rotary table
– Scanning with rotary table