![background image](http://html1.mh-extra.com/html/zeiss/clarus-500/clarus-500_instructions-for-use-manual_3323954107.webp)
Instructions for Use
6 Configuration
CLARUS 500
6.13 Connecting to a LAN
2660021165005 Rev. A 2017-08
107 / 144
4. To print a test page, select the printer and click
Print test
page
.
5. To view the properites of the printer, click
Properties
.
6.13 Connecting to a LAN
Prerequisite
þ
The CLARUS 500 must be connected to the local network using
a network cable. Be gentle with the connector when plugging
it into the CLARUS 500 ethernet port.
þ
Settings
are open.
Action
1. Select
Networking
.
2. To automatically assign an IP address to the instrument, set
DHCP
to
Enabled
. For a network with static IP addresses, set
DHCP
to
Disabled
and enter the relevant network informa-
tion.
3. Under
Network Drive Configuration
, select
Map...
.
4. Enter the network path for the shared folder you'd like to con-
nect to. The shared folder must be a root directory or a subdi-
rectory of a root directory.
Содержание CLARUS 500
