6
Changing the Mount of a ZEISS CZ.2
In this chapter you learn how to change the mount of a ZEISS CZ.2. The procedure consist of
2 parts which are both mandatory to successfully change a mount. You learn how to detach the
currently attached mount and how to attach a different mount. To make sure the ZEISS CZ.2
works properly, additionally complete the subsequent procedure:
Adjusting a ZEISS CZ.2 to Your Digital Camera
.
Detaching a Mount
You need
ZEISS CZ.2
ZEISS T6 torque wrench with a torque of 0.4 Nm
alternatively: regular T6 torque wrench with a torque of 0.4 Nm
ZEISS Interchangeable Mount Set for ZEISS CZ.2
T
he use of tools offered by ZEISS is highly recommended. You can purchase these tools directly from ZEISS
or your trusted ZEISS dealer. See
Mount Change Accessories
Requirements
Ensure that your working space is flat and leveled, in order to prevent the lens from tilting and falling over.
Ensure that the environment is clean and free from dust so that no dust particles enter the ZEISS CZ.2.
Ensure that the front lens cap sits on your ZEISS CZ.2, in order to avoid scratches.
