Zeiss Axioscope 5 Скачать руководство пользователя страница 80

Страница: 80 / 204

4 Installation | 4.13 Connecting the Microscope to the Mains

ZEISS

Parts and Tools



Hex Key, 3.0 mm

Prerequisite

The microscope is switched off.

The Colibri 3 LED light source is switched off.

The stand is equipped with the illumination mount.

The protective cap is removed from the illumination mount.

Procedure

1. At the illumination mount on the rear side of the stand, loosen the clamping screw

2. Insert the LED light source

with the dovetail ring into the illumination mount.

3. Tighten the clamping screw.

4. Connect the LED light source plug

to the stand socket

5. Tighten the fixing screws on the plug.

Proceed in the reverse order for removal.

4.12.6 Assembling the HXP 120 V Light Source

Info

For installing the HXP 120 V light source, consult the instruction manual supplied with the light
source.

4.13 Connecting the Microscope to the Mains

Prerequisite

The microscope is switched off.

The mains cable is unplugged.

Procedure

1. Connect the power cable to the power socket.

2. Connect the power cable to the mains.

Proceed in the reverse order for disconnecting the microscope from the mains.

Instruction Manual ZEISS Axioscope 5, Axioscope 5/7 MAT | en-US | Rev. 13 | 430035-7344-001

Содержание Axioscope 5













































































































































































































Результаты поиска

Содержание Axioscope 5

Отзывы:

Бренды по названию

Популярные бренды

Zeiss Axioscope 5, Инструкция по эксплуатации

Результаты поиска

Содержание Axioscope 5

Отзывы:

Бренды по названию

Популярные бренды