manualshive.com logo in svg

Zeiss Axioscope 5, Инструкция по эксплуатации

Поделиться
Скачать
Zeiss Axioscope 5 Скачать руководство пользователя страница 22

2 Safety | 2.5 Safety Devices and Interlocks

ZEISS

Pos.

Symbol

Description

6

Warning label: Possible danger!

Observe notes in the instruction manual and
the supplied documents.

7

Warning label: Hot surface!

8

Warning label: Crushing hazard!

Observe notes in the instruction manual and
the supplied documents.

9

Warning label: High electrical voltage.

10

WARNING: Possibly hazardous optical radiation 
emitted from this product. Do not look at 
operating lamp. Eye injury may result.

WARNING: UV emitted from this product. Avoid
eye and skin exposure to unshielded product.

Risk Group 3

according to IEC 62471

Risk group 3
according to IEC 62471

WARNING: Possibly hazardous optical radia-
tion
emitted from this product. Do not look at
operating lamp. Eye injury may result.

WARNING: UV emitted from this product.
Avoid
eye and skin exposure to unshielded product.

2.5 Safety Devices and Interlocks

In order to prevent injuries and/or property damage, the microscope is equipped with several
safety devices and interlocks. In case of defect or damage, the affected parts and the microscope
must be taken out of operation immediately and must be secured against unintentional use.

To verify the safety of the microscope, contact your ZEISS service representative and keep the ser-
vice logs and logbooks.

22

Instruction Manual ZEISS Axioscope 5, Axioscope 5/7 MAT | en-US | Rev. 13 | 430035-7344-001

Содержание Axioscope 5













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды