manualshive.com logo in svg

Zeiss Axioscope 5, Инструкция по эксплуатации

Поделиться
Скачать
Zeiss Axioscope 5 Скачать руководство пользователя страница 117

ZEISS

6 Care and Maintenance | 6.1 Safety During Cleaning and Maintenance

6 Care and Maintenance

To ensure the best possible performance of the microscope, maintenance must be performed on
a regular basis. Please keep the service logs for your microscope.

To maintain operational safety and reliability of the microscope, we recommend entering into a

ZEISS Protect Service Agreement

.

Info

For additional information and detailed descriptions, refer to further applicable documents or
ask your ZEISS Sales & Service Partner.

6.1 Safety During Cleaning and Maintenance

Only conduct preventive measures described here. All tasks of maintenance, service, and cleaning
not described must only be performed by an authorized ZEISS service representative.

Any unauthorized intervention or any operation outside the scope of the intended use can lead to
injuries and property damage and voids all rights to warranty claims. Only original spare parts
from ZEISS may be used.

 DANGER

Electric shock due to live parts

When the microscope is still switched on, coming in contact with live parts can lead to electric
shock or burn.

4

Switch off the microscope prior to opening or cleaning.

4

Disconnect live parts from the power supply.

NOTICE

Functional impairment due to dirt and moisture

Dirt, dust and moisture can impair the microscope functionality and can cause short-circuits.

4

Use the dust protection cover if the microscope is not used.

4

The ventilation slots must be unobstructed at all times.

4

Perform regular maintenance and cleaning according to the instructions in this document
and according to the instructions in the applicable documents.

4

Make sure that no cleaning liquid or moisture gets inside the microscope.

4

In case of damage, the affected parts of the microscope must be taken out of operation.

Instruction Manual ZEISS Axioscope 5, Axioscope 5/7 MAT | en-US | Rev. 13 | 430035-7344-001

117

Содержание Axioscope 5













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды