Zeiss AxioCam ERc 5s, Руководство пользователя

Страница: 42 / 64

6 Remote Control and OSD menu | 6.2 On Screen Display Menu
42 AxioCam ERc 5s | V 1.0 en
6.2.4 Setup User Menu
Illustration 9: Setup User menu
Menu entry Description
Date / Time Date and time in year-month-day / hour-minute-second format.
Each element can be adjusted using the
up / down buttons. The new time can be
set by pressing the OK button. Date and time are integrated into the folder and
file names on the SD card.
Flip image The following modes are available for image mirroring:
¢
FLIP H+V: horizontal and vertical mirroring
¢
FLIP V: only vertical mirroring
¢
FLIP H : only horizontal mirroring
¢
OFF: no mirroring
Load Settings The previously saved user settings (USER 1-4) can be loaded in this menu.
Selecting
FACTORY DEFAULT reinstates the default camera settings. After
confirmation with OK the camera will be restarted. This may take several seconds.
If the OSD menu is not available, the factory settings can be reinstated by pressing
the
C AWB buttons on the camera (keep pressed for two seconds).
Save Settings The current settings can be saved in a user storage location (USER 1-4).
They can be automatically loaded in the
Load Settings (see above) or Startup Set
menus (see below) at a later point in time or each time the camera is switched on.
On a PC observe the following: If the settings are saved,
Startup Set is
automatically set to this storage location.
Startup Set This setting determines which user storage location (USER 1-4) is to be loaded
each time the camera is switched on.