6 Installing Software and drivers |
6.1 Installing software and drivers
User Guide Axiocam 506 color/mono | V 3.0 en
23
6 Installing Software and drivers
Installing Software and drivers |
6.1 Installing software and drivers
Prerequisites
¢
To acquire images with the Axiocam 506 on a PC, you must install ZEISS
software (e.g. ZEN or AxioVision). You will find the software installation on the
DVD delivered. The camera drivers will be installed automatically during the
installation of the software.
¢
Before starting the installation of the software and drivers the camera must be
connected to the PC, see chapter Connecting the camera to a PC.
Procedure
1
Install the software according to the installation guide delivered with the
software.
2
During the installation you will be asked to install the camera drivers. Follow
the procedure by confirming the upcoming messages.
3
Restart your PC after the installation.
4
You can check in the device manager if the driver installation was successfully.
You have installed the software and the camera drivers. You can now start
acquiring images with your camera using ZEISS software. For more information
please read the software documentation.
