OPERATION
Axio Imager
Operating the motorized microscope via the touchscreen of the TFT display
Carl Zeiss
M70-2-0020 e 06/2009
430000-7344-001
133
4.8.6.2
Extras page
From the Extras page, you can get to the
Light
manager
,
Contrast manager
,
Oil stop
,
Dazzle
protection
,
Ethernet
and
Miscellaneous
tabs.
(1)
Light manager tab
This tab allows the user to switch the light
manager on and off.
With the aid of the light manager, light intensity is
adjusted automatically. For its uses, see Section
4.7.
Buttons accessible under
Load light manager
values
:
The
User-defined
button serves to load that the
values last saved via the
LM set
button.
Pressing the
Default
button will load the factory
settings back in.
New filter set combinations for transmitted light and reflected light (neutral-density filters, as
well as color and neutral-density filters) are offered for second-generation Axio Imagers. Those
filters are fully integrated into the light manager functions. For the sake of clarity, the MTB
2004 configuration program writes those filters directly into the filter wheel, without the user
having to do so through the TFT. What is more, this component is an ACR-enabled component.
This means that the equipment mounted on it is automatically read out by the microscope
during initialization. For this reason, a filter wheel of this type can be installed on every stand
without having to be reconfigured.
(2)
Contrast manager tab
This tab serves to switch the contrast manager
globally
ON
and
OFF
. These functions come in
handy for the user whenever contrast-dependent
motorized components are not to be moved
automatically.
Fig. 4-85
Microscope -> Settings -> Extras ->
Light manager
Fig. 4-86
Microscope -> Settings -> Extras ->
Contrast manager
