ACCURA Installation site requirements
8
Logistics and In-plant Transport
Unloading/ in-plant transport
Requirements
–
Sufficient floor and ceiling load capacity of the transport routes.
–
Transport routes must be clear.
–
The transport routes and doorways must be at least 10 cm wider and higher than the CMM assemblies, including
transport equipment. The dimensions of the CMM assemblies can be found under "Shipping crates, boxes and
pallets."
–
The CMM assemblies may only be unloaded and transported using transport lugs or pallets.
Note:
Ensure that you do not damage the insulated packaging during transport!
–
To unload and transport to the storage location or installation site, suitable transportation equipment and operat-
ing personnel must be provided. The type of transport equipment depends on the local conditions and the weight
of the CMM assembly being transported. The dimensions and weights can be found under Shipping crates, boxes
and pallets.
Examples of suitable transportation equipment: overhead crane, mobile crane, forklift
WARNING
Risk of injury through falling components if they are improperly secured.
Crushing and severing of body parts.
Secure the CMM assemblies being transported to prevent them from slipping and tipping.
A high center of gravity increases the risk of tipping.
Secure the individual loose parts so that they cannot move.
Move the CMM assembly very carefully, slowly and smoothly.