Zeiss 304970-9100-000, Инструкция по эксплуатации

Страница: 40 / 82

Preparations for use 14-Function Foot Control Panel, Wired or Wireless
Version 6.1
Page 40 G-30-1706-en
Pairing with the stand / FCP upgrade kit (optional)
– Pairing means the fixed relative assignment of the suspension system and
foot control panel.
It is only necessary for wireless operation.
– When pairing the system for the first time, it may take up to 20 seconds
until a signal link between the suspension system / FCP upgrade kit and
foot control panel has been established.
• Switch on the stand.
• Put the foot control panel in a vertical position (1) in the immediate vicinity
of the device (less than 1 m away).
on the stand
• Start the pairing on the stand in line with the respective user
instructions of the stand.
• After starting the pairing process on the stand, wait at least
10 seconds before performing any further steps on the FCP.
on the FCP upgrade kit (optional)
• Delete the existing pairing by pushing the "Pairing" button (9) on
the FCP upgrade kit for longer than 5 s and hold the button down.

The "Radio link intensity" status indicator (7) on the FCP upgrade
kit will be illuminated in orange. The existing pairing is deleted.
• Release the "Pairing" button (9) on the FCP upgrade kit.

The "Radio link intensity" status indicator (7) on the FCP upgrade
kit is no longer illuminated.
For FCP WL 2 only • Briefly press and release one of the buttons (3) on the FCP.

All four status indicators illuminate briefly.
NOTE! The foot control panel may be disabled
• If pairing is performed incorrectly or not at all, the foot control panel may
be disabled or activation of a control may trigger functions on a different
suspension system not assigned to the foot control panel.