Overview
2
The Unity ZCV3si is a continuously running fan that revolves around ‘one
product’, which has been designed to be flexible in application and to
meet the performance requirements of all ‘wet’ rooms within a dwelling.
Important:
Please read these instructions before commencing the installation
•
T
his
appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance.
•
C
leaning
and user maintenance shall not be made by children without supervision. Ensure
the fan is switched off from the mains supply before cleaning commences.
•
W
here
an open-flued oil or gas-fuelled appliance is installed, precautions must be taken to
avoid a back-flow of gases into the room.
•
W
hen
installing wall mounted fans, ensure that there are no buried cables or pipes in the way.
It is recommended that this fan is mounted >1.8m above floor level and within 400mm of the
finished ceiling.
•
T
he
fan should not be sited where it would be subject to a direct heat source in excess of 40°C,
e.g. at least 600mm distance from cooker hob.
•
O
bserve
appropriate safety precautions if working on steps or ladders.
•
W
ear
eye protection when breaking out wall or ceiling materials, etc.
•
T
o
disassemble the unit, disconnect from mains supply and use a screwdriver to segregate the
electronic components and motor from the plastic housing. Dispose items in accordance with WEEE.
WEEE Statement
This product may not be treated as household waste. Instead it should be handed to an appropriate
collection point for the recycling of electrical and electronic equipment. For more detailed information
about the recycling of this product, please contact your local council office or your household waste
disposal service.
Your Unity ZCV3si may have the following features activated:
* Intelligent sensing via the Smart Timer and Humidity technology (fully automatic integral delay / over-run timer and
humidity functions) which monitor the homeowners’ environment.
* Delay-on-timer, set between 1-60 minute period.
* A 'do not disturb' night mode where your fan will not boost for a period of time upon activation of the
light switch.
Note: These functions only affect the higher extract boost mode, your fan will continue to ventilate at the
lower trickle mode.
Key:
Installer Information
pages 2 - 9
User Information
pages 10 - 11
