EN - 6
Step
Action
3
Unscrew the two screws
B
that
lock the bypass flap
C
then pull
it gently toward you rotating it
slightly.
Pay attention to prevent
the back bolt and its
washer B from falling
down.
B
C
4
It is possible to replace the internal siphon extracting gently the rubber hose ends.
2.3 Access to the RIGHT back part (siphon and condensation tray)
Always comply with the safety regulations, warnings, comments and instructions
given in this document. Failure to comply with the safety regulations, instructions,
warnings and comments may lead to personal injury or damage to the unit.
In order to proceed with access to the RIGHT back coil (siphon and condensation tray), follow the
steps as described below:
Step
Action
1
Please follow the previous sequence described in the
"Paragraph 2.1 - Step 1 to 3"
, to
get access to the internal components.
2
The coil is not visible because
it is behind the metallic wall on
the right side of the unit. To get
access to the right back coil,
please unscrew the metallic panel
A
.
A
B