ZyPerUHD60
Ports (Encoder Front)
Analog Audio
The ZyPerUHD60 encoder supports a balanced analog audio input/output on a 5-pin phoenix
connector. (Note than connector can be input or output but not both at the same time)
Analog output would be 2-channel down-mixed audio from HDMI input. (PCM audio only)
Analog audio input can be routed independently from any video input that is present on the
HDMI port. Also note that it is not a requirement for HDMI video input to be present. The
ZyPerUHD60 encoder analog audio input can be routed to the analog audio output of any
ZyPerUHD60 decoder.
USB Type B
(Host)
G
USB 2.0 Host port. Configuration and routing of USB handled by the ZyPer
Management Platform configuration.
RS232
H
RS232 Control Port for sending and receiving side-band serial traffic to/from
decoders as directed by ZyPer Management Platform.
IR Input
I
Infrared Commands to be passed TO Decoders as configured by ZMP.
IR Output
J
Infrared Commands information passed FROM Decoders to Encoders as
configured by ZMP. Max current 330mA.
Index Definition
Port Name
Rev: 20231115
Page of
16
77
User Manual
A
B
Port Name
Index Definition
Power LED
A
LED illuminated when unit is powered. (Green)
Status LED
B
LED Illuminated when active video is being processed. Flashes when no video
is connected. (Green)
