zebris FDM-T Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 65

zebris FDM-T Скачать руководство пользователя страница 56

zebris Medical GmbH

FDM-T Technical Data and Operating Instructions

Page 56/65

7.6

Cleaning and disinfection

7.6.1 Cleaning Procedure

The treadmill and accessories are cleaned with a moist cloth while the device is switched
off and the mains plug taken out.

NOTE

Do not use any aggressive agents to clean the measuring system..

WARNING

Please make absolutely sure to switch off the device and pull the
mains plug out of the socket before you commence disinfecting and
cleaning.

7.6.2 Disinfection Procedure

The treadmill can be disinfected by wiping over with suitable agents. Best wipe the running
belt or other parts of the treadmill with a cloth soaked in disinfection liquid. In order to re-
move more resistant contamination directly spray the running belt with disinfection liquid.

Recommended disinfection agent:

Composition approx. 25% ethanol, 35% Propanol

E.g. Mikrozid Liquid / Schülke & Mayr or similar agents

NOTE

If you apply disinfection agent be sure to follow the recommenda-
tions given by the manufacturer of the disinfection agent strictly. Es-
pecially consider the rules concerning the commended application
time of the agent.

WARNING

On no account bring any disinfection fluids or other liquids in direct
contact with the FDM-T sensor.

Should any liquid enter the platform it is likely to be damaged.

WARNING

The fluids required for disinfecting and cleaning must be stored, pre-
pared and kept ready for use exclusively in the containers provided,
in order to avoid them being mistaken for other fluids.

NOTE

For conformation that disinfection has been carried out, it is advised
to place a visible sign on the running surface reading "disinfected".

«
...
54
55
56
57
58
...
»

Содержание FDM-T


































































Отзывы:

Нет отзывов