zebris Medical GmbH
FDM-T Technical Data and Operating Instructions
Page 34/65
4.3
LED Video Lights (SYNCLight / SYNCLight plus)
In order to produce well lighted and tack sharp video captures it is essential to maintain
perfect lighting conditions at the patient’s side. Only with adequate lighting conditions
video cameras can work with shutters times short enough to freeze fast movements and
capture sharp images.
The LED video lights
SYNCLight
and
SYNCLight plus
are accessories of the FDM-T sys-
tems and perfectly adapted for use in combination with zebris
SYNCCam
as well as the
force distribution measurement. Their brightness can be adjusted infinitely.
The integrated synchronization unit automatically switches the lights on at the start of a
measurement and turns them off again after stopping it.
Both SYNCLights are equipped with ¼ inch tripod threads and can be adapted to zebris
tripods as wells as commercially available camera tripods.
NOTE
In order ensure failure-free operation of the SYNCLights it is manda-
tory to keep the black heat sinks at their back side uncovered and
well air circulated all the time.
¼ Inch Tripod-
Thread
Type-
plate
Power-LEDs
Lower
Connector
Board
Upper
Connector Board
LED-
Heat Sink