zebris Medical GmbH
FDM-T Technical Data and Operating Instructions
Page 30/65
4
Video-Module
4.1
Conection to the FDM-T System
The FDM-T system can capture data simultaneously with up to 2 video cameras like the
zebris SYNCCam
which is available as an accessory. Alternatively high quality DV-
camcorders with an external microphone socket can be used for video capture.
In order to capture video data synchronized with force data the camera has to be connect-
ed to the galvanically isolated
VIDEOSYNC socket
located at the interface box.
4.1.1 Connection to the zebris SYNCCam
The zebris
SYNCCam
uses its integrated synchronizations flash to synchronized video
data and force data.
For connection of the SYNCCam the following synchronization cable is required:
REF-No.
183.0041 Video Sync-Control Cable 2.5
Length 2.5m, without amplifier
4.1.2 Connection to the DV-Camcordern with input for external microphone
The synchronization is effected by imprinting a clock signal on the soundtrack of the video
recording. This data is evaluated automatically by the application software zebris FDM
for
synchronizing the platform data and the video signal.
For the connection to the DV-camera the following synchronization cable is required:
REF-No.
183.0016 / Video Sync-Control Cable
Length 7m, with amplifier and control-LED