To maintain undisturbed transmission of the video signal it is mandatory
to use high quality USB cables.
Please, only use cables supplied or recommended by zebris for connecting
SYNCCam and PC.
The Sync-LEDs are fl ashing when the camera is disconnected from the
USB port. Therefore, it is strongly advised not to look directly into the
camera when it is disconnected to avoid dazzling.
Seite 26/69
Seite 26/41
FDM-T-Sports
4.2. SYNCCam
The SYNCCam is an accessory of the FDM-T system and perfectly adapted to be used in combination
with the pressure distribution measurement. All adjustments of the camera are carried out via
hardware setup integrated to the zebris FDM Software. The camera is connected to the PC by a USB
cable of type A-B included within the shipment.
The camera is equipped with ¼ inch tripod threads and can be adapted to zebris tripods as wells as
commercially available camera tripods.
Technical specifi cations
REF
01540191
Dimensions
110 x 125 x 15 mm (B x W x T)
Weight
approx. 190 g
Power Supply
USB2.0 (5V DC/500 mA)
Resolution
1920 x 1,080 Pixel (Full-HD)/Autofokus
Frame Rate
30 Hz
Synchronization
LED-Flash triggered by SYNC-IN socket
Mounting
¼” tripod-thread at bottom and back side
Flash LEDs
Status LED
SYNC-IN
socket
¼” tripod-thread
USB-socket Typ B
SYNC-OUT socket
