zebris Medical GmbH
FDM Technical Data and Operating Instructions
Page 7/36
1.6 System components
In its basic configuration the FDM measuring system consists of the following components:
FDM platform
External power supply unit
USB cable (Type A-A, 3.5 m length)
zebris application software WinFDM
IBM
®
compatible computer or notebook
Cable guard with screws
User Manual for platform and software
1.7 Computer requirements
As a rule, the measuring system FDM is supplied together with a computer. If the system
is to be operated using other computers or components, the user must then inquire
whether the intended coupling guarantees the necessary safety for the test person, the
operator and the surroundings by consulting the manufacturer, the authorized zebris sales
partner or by asking a specialist.
WARNING
If the computer is not supplied with the measuring system, the
manufacturer shall not be held liable for any damage or
malfunctions arising from a faulty coupling. Should additional
hardware be built into the computer or software installed, the
manufacturer shall not be liable for any malfunctions or
damage occurring.
Computers suitable for operation with the FDM measuring system must meet the following
minimum requirements:
IBM
®
AT or 100% compatible computer with Pentium IV processor
1024 MB RAM
VGA graphics card with a 1024 x 768 resolution and a color depth of 24 bit true color
Color monitor with the corresponding resolution
Windows XP/Vista
Mouse
Keyboard
USB interface
