zebris Medical GmbH
FDM Technical Data and Operating Instructions
Page 15/36
2.4 Specifications for the external power supply unit
All zebris FDM system can be operated by the same type of external power supply.
Input
Output
100 - 240 V AC
16V DC
50 - 60 Hz
60 W
Cable Length
AC-Cable
1.7 m
DC-Cable
5 m
Pin arrangement / polarity
NOTE
It is absolutely necessary to connect the external power supply unit
to a power outlet that contains a ground contact in order to secure
fault free and save operation of your FDM-T system. In case it is
necessary to use a mains adapter make absolutely sure that it has
ground contacts as well.
NOTE
Be sure to position the measuring system in a way that allows easy
access to the power outlet at any time in case it is necessary to
disconnect the system from mains supply.
