zebris Medical GmbH
FDM Technical Data and Operating Instructions
Page 21/54
3.6.2 Synchronization output (SYNC-OUT)
If a third party device is connected to the synchronization output SYNC-OUT then depending
on the setting of the configuration window from the application software will trigger a syn-
chronized measurement of the third party device either v
ia start/stop or “frame by frame”
mode.
Electrical specifications
Output resistance
100
High-Level
≥ 2,0V
Low-Level
≤ 0,8V
Respective Plug Type of plug for SYNC-IN
Series „00“, 4-pin , fitting Nut 0°
LEMO- Part. No. EPG.00.304.NLN
View
Front side
Fitting Nut: 0°
Passender Steckertyp für SYNC-OUT
LEMO- Part. No. FGG.00 304.CLADxxxx
Pin assignment
Pin 1
+5V
Pin 2
GND
Pin 3
Activ_OUT
Pin 4
Clk_OUT
View
Solder side
Fitting Nut: 0°
