zebris Medical GmbH
FDM Technical Data and Operating Instructions
Page 11/54
3
Product description
3.1
System components
In its basic configuration the FDM measuring system consists oft he following components:
FDM platform
External power supply unit
USB cable (Type A-A, 3.5 m length)
zebris application software zebris FDM
IBM
®
compatible computer or notebook
User Manual for platform and software, equipment and zebris FDM Software
3.2
Technical specifications FDM measuring systems
3.2.1 FDM Sensor
The sensors of the different FDM system only vary in size of the measuring area, the number
of single sensors included in the sensor module and the supported sampling frequency. All
other technical data is identical:
Interfaces
USB
Synchronization input/output
Video synchronization
Infrared synchronization
Connection
Interface box on bottom of housing frame
Measuring principle
capacitive force measurement
Operating voltage
16-18V DC
Power consumption
max. 60W (depends on type)
Power supply via external power supply unit 100-240V AC / 50-60Hz
Measuring Range
1-120N/cm2
Accuracy of the calibrated measuring range (1-120N/cm
2
) ±5% (FS)
Mechanical crosstalk
-25dB
Pressure threshold
1N/cm²
