Zebra DS4208, Быстрый старт

Страница: 1 / 11

DS4208
1 2 3
7
0
0
9
1 2
3 4
5
http://www.zebra.com/ds4208
STEP 2 -CONNECT CABLE TO A HOST
STEP 1 - ATTACH CABLE TO SCANNER
Quick Start Guide
Scan
ONE
of the bar codes below
Scan
ONE
of the bar codes below Scan
ONE
of the bar codes below
Attach Cable Remove Cable (to change interface)
STEP 3 - SET UP INTERFACE (Scan Host Bar Codes)
STANDARD RS-232
OPOS/JPOS
IBM AT Notebook
IBM PC/AT and IBM PC COMPATIBLE
HID KEYBOARD EMULATION
Symbol Native API (SNAPI) without Imaging Interface
IBM HAND-HELD USB
Important:
Out of box, RS-232 and USB interfaces require no bar code scan setup. Bar codes are provided for complex programming or interface changes.
ADD AN ENTER KEY (CARRIAGE RETURN/LINE FEED)
To add an
ENTER
key after scanned data, scan all THREE bar codes below in numerical order.
SCAN OPTIONS
<DATA><SUFFIX> ENTER
RS-232 Keyboard Wedge USB
NOTE:
Cables may vary depending on configuration.
IBM 46XX
Scan
ONE
of the bar codes below
Keyboard Wedge USB RS-232 IBM 46XX
POST IN WORK AREAPOST IN WORK AREA
To add a
Tab
key after scanned data, scan all THREE
Enter
key bar codes above in numerical order then scan all FIVE bar codes below in numerical order.
See Product Reference Guide for detailed information Note: An audible click sounds when the shielded cable is inserted correctly.
PORT 5B
PORT 9B
ADD A TAB KEY
SCAN SUFFIX