Zebex Z-3060, Руководство пользователя, Страница: 5 / 19

Handheld Omnidirectional Laser Scanner
iii
Radiant Energy: The laser scanner uses one low-power visible laser diodes operating at 650nm in an
opto-mechanical scanner resulting in less than 3.9
μ W radiated power as observed through a 7mm aperture and
averaged over 10 seconds.
Do not attempt to remove the protective housing of the scanner, as unscanned laser light with a peak output up
to 0.8mW would be accessible inside.
Laser Light Viewing: The scan window is the only aperture through which laser light may be observed from
this product. A failure of the scanner motor, while the laser diode continues to emit a laser beam, may cause
emission levels to exceed those for safe operation. The scanner has safeguards to prevent this occurrence. If,
however, a stationary laser beam is emitted, the failing scanner should be disconnected from its power source
immediately.
Adjustments: Do not attempt any adjustments or alteration of this product. Do not remove the protective
housing of the scanner. There are no user-serviceable parts inside.
Optical: The use of optical instruments with this product will increase the eye hazard. Optical instruments
include binoculars, magnifying glasses, and microscopes but do not include normal eye glasses worn by the
user.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.