Zebex Z-3060, Руководство пользователя, Страница: 14 / 19

Handheld Omnidirectional Laser Scanner 8
U
SER
’
S
M
ANUAL
Operating the Scanner
The scanner can read barcodes in either omnidirectional or single-line mode to
accommodate different requirements. This scanner is truly omnidirectional while
single-line mode is usually used for better aiming on the specific barcode on the same
sheet of more than one barcode printed closely.
Function Button
Press down the Function Button on top of the scanner as shown below to switch
between omnidirectional scanning and single-line scanning modes.
Function Button

If the scanner is powered off and re-turned on, even the function button is
pushed down before it’s turned off, the scanner stays as factory default
(omnidirectional scanning). Hence, in order to have single-line scanning, the
function button has to be pressed up and pressed down again.
1) Presentation Mode:
As if the scanner is on the stand, the scanner will always stay active in Presentation Mode.
In other words, no matter if the Function Button LED light is on or off, the scanner stays in
the Presentation Mode.