Solo documento principale.
Ident
ific
at
ion:
M
D
-AL
-GI
-00
R
ev
. 4
.0
of
31.
01.
18
–
A
ppl
ic
at
ion:
G
ID
Pile Reg. IT12110P00002965 -
Share Capital € 100,000.00 fully paid up
AR Bus. Reg. no. 03225010481
– AR REA no. 94189
ISO 9001 Certified company - Certificate no. 9151 - CNS0 - IT-17778
Zucchetti Centro Sistemi S.p.A. - Green Innovation Division
Via Lungarno, 248 - 52028 Terranuova Bracciolini - Arezzo, Italy
tel. +39 055 91971 - fax. +39 055 9197515
[email protected] - [email protected] -
zcsazzurro.com
Manual of 25/05/2020 Rev. 1.0 “User Manual 22K-BE-24”
36/44
7.
Working mode
Refer to chapter 6 for configuring the various modes.
7.1.
Online
This operating mode is typical for large users with multiple battery chargers on the same network who
need to manage charging authorisations, charging bookings, remote stops and starts, billing system, etc.
Figure 35 - Online mode
The charger is set to online mode by default, so this is how it will be set the first time it is turned on. The
online charging mode can only be set if the ENGATE is connected for managing authorisations, invoices,
and other configurations, the RFID cards are optional.
If the customer wants to check the authorisations and invoices by using the ONLINE configuration by
connecting to the ENGATE in order to use the portal that has already been developed. Up to 12 chargers
can be connected to the same ENGATE via the CAN port; the ENGATE is powered through the CAN port,
if the connection distance to the first battery charger is less than 10 meters, otherwise, an additional
power supply is required (external 12V power supply unit, refer to the ENGATE manual for more
details).
This is typically used in the city, or in large shopping centres, with the aim of providing this service to
customers through a complete billing system; for this purpose, it is necessary to inquire about the legal
aspects of this service. The charging can be started or stopped by scanning the RFID card or the QR Code
accessed via the appropriate app installed on the customer's smartphone.
After configuring and connecting the ENGATE, check the indications on the display of each connected
charger to verify the presence of the icons:
