User’s Manual 1PH HYD3000-HYD6000-ZP1
Rev. 1.0 01/09/2023
Identification: MD-AL-GI-00
Rev. 1.1 of 27/01/2023 - Application: GID
114/193
10.6.5.
IV Curve Scan
6.IV Curve Scan
1.Scan Control
“Up” ↑
“Down” ↓
Enable
Disabled
2.Scan Period
***min
3.Force Scan
The user can enable the “IV Curve Scan” (scan MPPT) to have the 1PH HYD3000-HYD6000-ZP1 inverter
periodically check the absolute maximum power points to provide maximum energy from a partially shaded PV
array.
The user can enter the scan period or force an immediate scan.
10.6.6.
Logical Interface Control
Enables or disables a logical interface. This feature is only available under certain safety regulations.
4.Logical Interface
Control
Enable
Disable
10.6.7.
Factory Reset
5.Factory
Reset
1.Clear Energy
Data
2.Clear Events
Clear the total energy yield of the inverter.
1.Clear
Generated
Power
Cancel
Enter 0001
Clear the history events of the inverter.
2.Clear List
Cancel
