User’s Manual 1PH HYD3000-HYD6000-ZP1
Rev. 1.0 01/09/2023
Identification: MD-AL-GI-00
Rev. 1.1 of 27/01/2023 - Application: GID
112/193
10.6.
Advanced settings
2. Advanced
settings
Enter password: 0715
“Up”↑
“Down” ↓
1.Battery Parameter
2.Battery Activation
3.Anti Reflux
4.IV Curve Scan
5.Logic interface
6.Factory Reset
7.Parallel Setting
8. Reset Bluetooth
9.CT Calibration
10.Set ElevtricityMter
11.Off grid ground
Select “2. Advanced Settings” and press “OK”, “Enter password” appears. Enter the password “0715”, press “Up”
or “Down” to change the first digit, press “OK” to move to the next digit, when “0715” appears on the screen press
“OK” to enter the “Advanced Settings” interface.
If “Wrong, Try Again” appears on the screen, press “Back” and enter the password again.
10.6.1.
Battery parameters
1.Battery Parameters
“Up” ↑
“Down” ↓
1)Battery type
2)Battery Number
10.6.2.
Battery Quantity
Group 1 represents the number of cascading battery modules for the BAT1 port of the inverter.
Group 2 represents the number of battery modules connected to the BAT2 port of the inverter.
2 Battery 1
2.Battery 1
1.Max Charge (A)
4.Set
ForceChargeTime
2.Max Discharge (A)
5.Save
3.Discharge Depth
