User’s Manual 1PH HYD3000-HYD6000-ZP1
Rev. 1.0 01/09/2023
Identification: MD-AL-GI-00
Rev. 1.1 of 27/01/2023 - Application: GID
109/193
1
）
If PV generation > LOAD consumption
(ΔP > 100W), inverter will charge battery
2
）
If PV generation = LOAD consumption(ΔP >
100W), inverter wont’ charge or discharge battery.
3
）
If PV generation < LOAD consumption
(ΔP
＞
100W), inverter will discharge battery.
10.5.7.
Communication address
Select “6. Communication Address selection”, then press “OK”. Press “Up” or “Down” to change the first digit, press
“OK” to move to the next digit. After changing the communication address-485 (
default: 01)
, press “OK”.
10.5.8.
Self-test
Select “7. Self-test”, press “OK” to enter the self-test interface.
7.Self-test
“Up” ↑
“Down” ↓
1. Fast self-test
2. STD Self-test
3. Set QF time
3. Set QV time
5. Control 81.S1
