Ide
nti
fic
ati
on
: M
D-
AL
-GI
-0
0
Re
v. 1
.1 o
f 2
7/0
1/2
02
3
-
Ap
pli
ca
tio
n:
GID
Pile Reg. IT12110P00002965 - Share Capital € 100,000.00 fully paid up
AR Company Reg. no. 03225010481 - REA AR no. 94189
ISO 9001 Certified Company - Certificate no. 9151 - CNS0 - IT-17778
Zucchetti Centro Sistemi S.p.A. - Green Innovation Division
Via Lungarno, 248 - 52028 Terranuova Bracciolini - Arezzo, Italy
tel. +39 055 91971 - fax. +39 055 9197515
[email protected] - [email protected] –
www.zcsazzurro.com
10.5.
Basic settings
1. System Setting Press “OK"
“Up”↑
“Down” ↓
1.Language Setting
2.System Time
3.Safety Param.
4.Energy Storage Mode
5.Auto Test
6.Input channel
Configuration
7.EPS Mode
8.Communication Addr.
10.5.1.
Set language
Select “1. Language”, then press “OK”. Press “Up” or “Down” to select the language, then press “OK.”
A quicker way: simultaneously press “Back” and “OK” to change the system language.
10.5.2.
Set Time
Select “2. Time”, press “OK” to enter the menu for setting the time, the format is Year-Month-Day
Hours:Minutes:Seconds.
Press “Up” or “Down” to change the first digit, press “OK” to move to the next digit. After entering the current time,
press “OK.”
10.5.3.
Safety Parameter.
User can modify the Safety Parameter. of the machine through the USB flash disk, and the user needs to copy the
parameter information that needs to be modified into the USB flash disk card in advance.
10.5.4.
Energy Storage Mode
Select “3. Energy Storage Mode” and press “OK” to enter the interface for setting the energy storage mode.
3.Energy Storage
Mode
“Up” ↑
1. Select automatic mode
2. Select charge mode
