14
User manual
EN
USinG The commUnicaTion Box
The “Communication Box” allows you to recall the robotic
cleaner to the recharging base or start it up even if it is not
within the set working time band.
Press the “HOME” button to recall the robotic cleaner to the
recharging base, the “Battery” led will start to flash and the
robotic cleaner will return to the recharging base when it
acknowledges the recall command moving to the range of
action of the recharging base itself. Press the “WORK” button
or wait a few hours before starting the robotic cleaner again as
per the standard operating settings.
Press the “WORK” button and the robotic cleaner will perform
a normal work cycle even if the current time is outside the
set time band, the “Power” LED begins to flash and the work
cycle starts within ten seconds or so, only if the batteries are
sufficiently charged. On completing the work cycle, the robotic
cleaner will return to the recharging base and start operating
again as per the standard operating settings.
ordinary cleaninG
Clean the filter frequently, and then less frequently in relation to the dirt found in the filter. The frequency of cleaning depends on
several factors: size of the pool, the ease with which it gets dirty, the frequency of use, etc.
-
Use the retrieving hook to bring the robot to the surface.
-
Wait for the turbines to stop working.
-
Remove the robot gently from the water, grasping it by the handle on the retrieving hook, and place it on the ground.
-
Wait for it to emit four consecutive beeps to confirm that the robot is off.
-
Unhook the fastening clips of the bonnet.
-
Lift the bonnet and remove the filters to be cleaned.
Содержание Marlin
Страница 1: ......
