
802.11ax Access Point
User Manual
58-150006-IQN_V1.0
Page 5
3.4. Installing a Cable Gland (SP-WP-CM20)
(1)
Dismantle all the components of waterproof cable gland,
(2)
Plug the cable in between of Rubber clamper.
(3)
Insert rubber housing
(4)
Insert the rubber housing back to connector body
(5)
Tighten the connector nut.
(6)
Recheck waterproof cable gland.
3.5. Powering the AP
Connect the PoE 48V, then it will power on.
Note:
Please wait for 5-10 seconds while powering on.
Содержание SP250
Страница 1: ...ZCOM SP250 SP250 S5 11ax Access Point...