Zcom SP250, Инструкция по эксплуатации, Страница: 6 / 62

802.11ax Access Point User Manual
58-150006-IQN_V1.0
Page 3
Port Description
WAN / PoE Port
The WAN/PoE port operates at 10/100/1000/2500Mbps at supports an RJ45
connection.
Supporting PoE In, the AP can receive power through the WAN port from PSE (Power
Sourcing Equipment), rendering the need for a power supply into the power port
unnecessary.
LAN Port The LAN port operates at 10/100/1000/2500Mbps at supports an RJ45 connector.
GND Port Ground through GND Port.
Reset Button After use, the setting will be reset to default. Please press and hold about 15 seconds.
RS485-A/B
(Not Available)
You can be transmitted through this port. (SP250-A04 Only)
SIM Card Port
(Not Available)
SIM card can be inserted into this slot for use. (SP250-A04 Only)
2.4. LED Indicator
The following table describes the AP status referring to different LED behavior.
Color Behavior Description
Red
on initialize
blink
System is upgrading; do not touch or unplug power adaptor.
White
on Connected to internet.
blink Unconnected to internet.