
802.11ax Access Point
User Manual
58-150006-IQN_V1.0
Page 49
4.3.3.4. Static Routes
This page is used to display and configure static IPv4 / IPv6 routes on the AP.
The following parameters are available in this section:
Parameter
Description
Interface
Select the interface for the static IPv4 route here. Options to choose from are lan and
wan.
Target
Enter the target IPv4 address or IPv4 network address for the static IPv4 route here.
IPv4 Netmask
Enter the IPv4 subnet mask for the static IPv4 route here.
IPv4 Gateway
Enter the IPv4 address of the gateway for the static IPv4 route here.
Metric / MTU
Enter the Metric / MTU for the static IPv4 route here.
The following parameters are available in this section:
Parameter
Description
Interface
Select the interface for the static IPv6 route here. Options to choose from are lan and
wan.
Target
Enter the target IPv6 address or network CIDR (Classless Inter-Domain Routing) for the
static IPv6 route here.
IPv6 Gateway
Enter the IPv6 address of the gateway for the static IPv6 route here.
Metric / MTU
Enter the metric/MTU for the static IPv6 route here.
Содержание SP250
Страница 1: ...ZCOM SP250 SP250 S5 11ax Access Point...