802.11ax Access Point
User Manual
58-150006-IQN_V1.0
Page 2
C
HAPTER
2. H
ARDWARE
C
OMPONENTS
2.1. Package Contents
Carefully remove all the items from the packing of access point (AP). The following items should be included in the
packaging:
SP250/SP250-S5
One mounting bracket
+ Four screws
Waterproof cable gland (*Note)
One ground wire
One clamp
Note:
provides two waterproof cable glands.
2.2. Installation Requirements
TERMS OF USE: All Ethernet cabling runs suggest using CAT.6, 24 AWG (or above) Shielded Twisted Pair (STP) cabling.
In addition, please cut the cable into a proper length, strip the cables on both ends, and crimp the wires into RJ45
connectors.
It is the professional installer’s responsibility to follow local countr
y regulations, including operation within
legal frequency channels, output power, indoor cabling requirements, and Dynamic Frequency Selection (DFS)
requirements.
2.3. Physical Ports
The following physical ports are available on the SP250 /SP250-S5.
Содержание SP250
Страница 1: ...ZCOM SP250 SP250 S5 11ax Access Point...