
802.11ax Access Point
User Manual
58-150006-IQN_V1.0
Page 32
The following parameters are available in this section:
Parameter
Description
Bridge interfaces
Select this option to bridge this interface with another interface.
Enable STP
Select this option to enable the STP function on this interface.
Note:
This option is only available if Bridge mode is enabled.
Interface
Select the physical interface that will be associated with this interface configuration
here.
If desired, select and enter a Custom Interface name in the textbox provided.
Note:
Multiple selections are only available when the Bridge interfaces option is
selected. Normally, only one interface can be selected here.
The following parameters are available in this section:
Parameter
Description
Create / Assign Firewall-
Zone
Select the firewall zone that is assigned to this interface.
Select unspecified to remove the interface from a firewall zone.
To create a new firewall zone, enter the name of the new firewall zone in the space
provided.
4.3.3.2. Wifi
4.3.3.2.1. Wireless Overview
This page is used to display and configure the 802.11 wireless settings.
Содержание SP250
Страница 1: ...ZCOM SP250 SP250 S5 11ax Access Point...