SP230/SP230-S5
2x2 PtP/PtMP 802.11ac Wave 2 Outdoor Access Point
User Manual
Page 8
Note:
The pole-supported bracket can accommodate up to 6 cm (2.36”) in diameter.
Wall-Mount
3.2.2.
Separate it into two parts: half-mounting
bracket and M-type bracket and unscrew
four hex head machine bolts on the two-
dimensional mounting bracket.
Attach the intermediate steel plate to the
device using four M5 screws (included in
the packaging). Securely tighten the screws.
Attach half-mounting bracket to the device
with intermediate steel plate using four M4
screws (included in the packaging).
Securely tighten the screws.
Attach M-type bracket to the device onto
the wall, using four M5 screw
anchors (included in the packaging).
Securely tighten the screws.
Attach half-mounting bracket to the M-type bracket, then screw four hex head machine bolts.
Securely tighten the screws.
