SP230/SP230-S5
2x2 PtP/PtMP 802.11ac Wave 2 Outdoor Access Point
User Manual
Page 5
Chapter 2.
H
ARDWARE
F
EATURES
Package Contents
2.1.
Carefully remove all the items from the packing of AP. The following items should be included in
the packaging:
One outdoor access point
One clamp
Two waterproof cable glands
One ground wire
One mounting bracket
+ Four screws
Note:
SP230
and
SP230-S5 both provides two waterproof cable glands.
Installation Requirements
2.2.
TERMS OF USE: All Ethernet cabling runs must use CAT5e, 24 AWG (or above) Shielded Twisted
Pair (STP) cabling. In addition, please cut the cable into a proper length, strip the cables on both
ends, and crimp the wires into RJ45 connectors. It is the professional installer’s responsibility to
follow local country regulations, including operation within legal frequency channels, output power,
indoor cabling requirements, and Dynamic Frequency Selection (DFS) requirements.
