SP230/SP230-S5
2x2 PtP/PtMP 802.11ac Wave 2 Outdoor Access Point
User Manual
Page 14
Parameter
Description
IPv6 Address
Enter the IPv6 address.
IPv6 Prefix
Enter the IPv6 prefix IP address.
Default Gateway
Enter the IPv6 address of the gateway for the interface.
IPv6 Primary/Secondary DNS Server Enter primary/secondary DNS server. (if require the second
one)
Switch mod
Displays basic information of the switch mod:
Connect with via DHCP – connect the AP via DHCP of the
network or provided by the Access controller DHCP IP
address.
IP – Connect the AP via Access controller IP address.
DNS - Displays the MAC address of the interface.
Wireless Switch Address 1/2/3/4
Enter wireless access controller IPv4 IP address.
Wireless Switch IPv6 Address1/2/3/4 Enter wireless access controller IPv6 IP address.
Wireless Switch Name1/2/3/4
Enter access controller DNS value.
Management VLAN ID
Enter specific management VLAN ID which is providing
from the Network.
4.2.2.3.
System Log
This page is used to display the system log on the AP. Information on this page is useful for
troubleshooting.
System
4.2.3.
4.2.3.1.
AP Mode
This page is used to displayed and changed AP modes.
•
Thin AP - Specifies to use and configure this AP with a wireless controller in the network. The
wireless controller will be responsible for the configuration of this AP. Only a few functions
are available to be configured on this AP in this mode.
•
Fat AP - Specifies to use and configure this AP without a wireless controller in the network.
More functions are available to be configured on this AP in this mode.
